Fabric Roll Packing Machine
all
Fabric Inspection Machine
Fabric Folding Machine
Fabric Cutting Machine
Beam Stacker
Digital Counter Meter
Fabric Relaxing Machine
Tubular Fabric Reversing Machine
Tubular Fabric Slitting Machine
Automatic Tube-Sewing Machine
Hydraulic Warp Beam Trolley
Motorized Warp Beam Trolley
Cloth Roll Trolley
Warp Beam
SUNTECH Service
Fabric Rolling Machine
Fabric Roll Packing Machine
Accessories
Batcher Machine

Fabric Roll Packing Machine

Why would some fabrics roll are not packed, but just passed away from the machine(ST-ARPM)?

    It is because there is no inlet conveyor, operator would send the fabric roll to main packing unit directly by hand. The fabric roll had not finished width sealing,when operator put another roll into packing machine, so the machine didn’t detect the coming fabric roll and fail packing.Besides, if the fabric roll is not feed straightly onto the conveyor which also disturbs the detection of the coming fabric roll and fail packing.Solutions 1)Equip an fabric roll inlet conveyor   2)Keep feeding fabric roll one by one with a little pause, not squeezed.   3)Feed fabric roll straightly onto conveyor, not deflected. Automatic Fabric Roll Packing Machine (ST-ARPM)

ST-CBPM:Both sealing blades has the problem of film sticking. Then couldn't seal well?

    After using the machine, please turn off the power and use the cotton cloth to wiping the sealing cutters when the cutter still have the heat.     Also you can paint Teflon on the surface of the cutters.     If it’s still not workable, we suggest you to buy a new cutter. 

Can we use poly film thicker than the 60-80 microns?

    Yes, We can use PE-film thicker than 60-80 microns, (for example 120mm) but if so, we will need to specially customize the packing machine's sealing cutter,  and the cutter will only be suitable for that thickness.    Normally we would recommend customer to use the PE film in thickness 60-80 micros, because it is not only suitable for the our standard sealing cutter, but also its thickness is enough for the roll packing.Fabric Roll Packing Machine: http://www.suntech-machinery.com/pid17183055/SUNTECH-Fabric-Roll-Packing-Machine.htm

How to put packed fabric roll into our fabric roll trolley automatically after packing?

   The Lifter can be added after packing, it can rise the fabric roll to the exact height then push it to the stalliage for collection directly. The height can be customized by customers requirements, and its price will be vary.Fabric Roll Packing Machine: http://www.suntech-machinery.com/pid17183055/SUNTECH-Fabric-Roll-Packing-Machine.htm

Why the packing effect is not good? Why there is crease in the packed roll?

  First of all, I have to say it is fabric roll packing machine, it has no crease eliminate function. You need to make sure there is no crease on your fabric roll before packing. Then please kindly check below information one by one:  1) Please kindly check the PE film, whether it is correct and in good quality; thickness 60-80 Microns;  2 ) Please kindly check if the sealing cutter temperature is appropriate:Normally it is around 125-130℃,but it could be adjusted as per the actual situation.   3) Make clearance and maintenance for the sealing cutter.Please clear the cutter and cover ‘Anti-Adhesive Oil’ or Laundry Soup on the Teflon Surface regularly.   4) Please kindly check the temperature of Heat Chamber:Normally it is around 180-200℃, but it could be adjusted as per the actual situation.

What is the appropriate sealing cutter and heat chamber temperature?

What is the appropriate sealing cutter temperature?Normally it is around 125-130℃,but it could be adjusted as per the actual situation.What is the appropriate heat chamber temperature?Normally it is around 180-200℃, but it could be adjusted as per the actual situation.

What is the packing material?

  Polythene PE film, Thickness 60-80 Microns. Two different kinds of polythene film for the two packing proposals.1).Normal Packing Proposal:  Normal PE film, thickness 60-80 microns, without heat shrinking function 2) Vacuum Packing Proposal:  Heat-shrinking PE film, thickness 60-80 microns for vacuum packing. The heat-shrinking film should be able to continuously working ten seconds under 180-200℃.(degree celsius)

Why would some fabric roll are not packed, but just passed away the machine?

  It is because there is no inlet conveyor, operator would send the fabric roll to main packing unit directly by hand.   The fabric roll had not finished width sealing,when operator put another roll into packing machine, so the machine didn’t detect the coming fabric roll and fail packing.  Besides, if the fabric roll is not feed straightly onto the conveyor which also disturbs the detection of the coming fabric roll and fail packing.  Solutions 1) Equip an fabric roll inlet conveyor 2) Keep feeding fabric roll one by one with a little pause, not squeezed. 3) Feed fabric roll straightly onto conveyor, not deflected. 

Why the main sealing PE film can not be cut after changing a new main sealing cutter?

The principle of cutting is “pressure”,  not the “sharpness” of the cutter. We suggest you to adjust the position of sealing cutter by regulating all screws (in below red), to make sure the cutter is in the horizontal plane, so that the cutter is with uniform force.

What if the teflon on sealing cutter's surface about Fabric Roll Packing Machine was damaged?

We have teflon tape in random accessories,if the damage is not serious,you can make a simple repair with teflon tape.if serious,you need buy a new sealing cutter

Why the PE film can not be cut off by sealing cutter after changing the new sealing bar?

1)Please make sure the the new silicone bar is used with new sealing cutter2)The principle of cutting is “pressure”,  not the “sharpness” of the cutter. We suggest you to adjust the position of sealing cutter by regulating all screws (in below red), to make sure the cutter is in the horizontal plane, so that the cutter is with uniform force.

ST-ARPM How to figure up the width fo PE film according to the width

How to figure up the width of PE film needed according to the width?FABRIC WIDTH = ROLL WIDTH + ROLL DIAMETER + 15cm

Can the Fabric Roll Packing Machine classifier the fabric roll intelligent?

The Automatic Fabric Roll Packing Machine is upgraded - with the function of smart classification.Operator can setup the assignations in PLC system.Fabric roll from inspection machine no.1 can be assigned to storage stage no.1 (or no.2 or no.3 or no.4).Fabric roll from inspection machine no.2 can be assigned to storage stage no.2 (or no.1 or no.3 or no.4).Fabric roll from inspection machine no.3 can be assigned to storage stage no.3 (or no.1 or no.2 or no.4).Fabric roll from inspection machine no.4 can be assigned to storage stage no.4 (or no.1 or no.2 or no.3).

ST-ARPM HOW CAN THE AUTOMATIC FABRIC ROLL PACKING MACHINE PACK FABRIC ROLL IN ORDER?

ST-ARPM Automatic Fabric Roll Packing MachineAutomatic Fabric Roll Packing Machine is used to pack fabric rolls for vacuum effect.How can the machine pack fabric roll in order?The whole process is controlled by PLC and adjusted by photo-sensor.1.No auto storage conveyor: if the speed of packing can catch up with the speed of rolling,there is no need to add storage stage. Several Inlet Conveyor + Packing MachineWhen the fabric roll is in width wrapping conveyor for main sealing,all the other fabric rolls will stop at the Inlet Conveyors. Once the width sealing finished and the fabric roll leave to side sealing,the photo-sensor detect the width wrapping conveyor is empty and it would send signal to start the inlet conveyor for next fabric roll packing.2.An auto storage conveyor will be recommended to install since the speed of packing can't catch up with the speed of Rolling.When the photo-sensor detect there is no fabric roll in inlet conveyor,it would send to start the auto storage conveyor to send fabric roll to inlet conveyor.